FREE SHIPPING ON ORDERS >$35

FAQs

Frequently Asked Questions



Everything you need to know about ordering genuine Bambu Lab filament from 3D Supply Singapore.

Products & Filament

Are your Bambu Lab filaments genuine?
Yes. Our Bambu Lab filaments are genuine Bambu Lab products.

Where applicable, genuine Bambu Lab refills include the original RFID tag for automatic filament recognition on compatible Bambu Lab AMS systems.
Are your products stocked locally in Singapore?
Yes. Products shown as in stock are held locally in Singapore and are available for local fulfilment.

This means you do not need to wait for an overseas shipment when the product is already in stock with us.
What is a Bambu Lab filament refill?
A filament refill contains the filament without a new reusable plastic spool.

The refill is designed to be installed onto a compatible Bambu Lab reusable spool.

Using refills reduces plastic waste and also makes filament easier to store and transport.
Does a filament refill include a reusable spool?
No, unless you specifically select the Add-On Spool option.

If you do not already own a compatible reusable spool, you can select an Add-On Spool where available or purchase a reusable spool separately.
Does the RFID still work with a refill?
Yes. Genuine Bambu Lab RFID refills include the RFID tag required for compatible Bambu Lab AMS systems to automatically recognise supported filament information.
Can I use Bambu Lab filament with other 3D printers?
Generally, yes.

Bambu Lab filament uses standard 1.75 mm filament and can be used with many compatible third-party 3D printers.

However, Bambu Lab-specific features such as automatic RFID recognition may not work with non-Bambu printers.

Please check your printer's filament and material compatibility before ordering.

Installing Filament Refills

How do I install a Bambu Lab filament refill?
Install the refill onto a compatible reusable spool and make sure the refill is correctly seated and aligned.

Do not remove the securing straps until the reusable spool has been fully assembled and locked.

After the spool is securely assembled, carefully remove the securing straps while keeping control of the filament end.

Incorrect installation may allow the filament to loosen, unravel or become tangled.
Why is it important not to remove the refill straps too early?
The securing straps keep the refill tightly wound before installation.

If the straps are removed before the refill is properly installed and secured inside the reusable spool, the filament may expand, loosen or cross underneath neighbouring windings.

This can result in serious tangling and feeding problems.

Always fully install and lock the reusable spool before removing the securing straps.
What should I do if my refill looks damaged or tangled before installation?
Do not remove the securing straps.

Take clear photographs showing:

- The refill;
- The securing straps still attached;
- The affected filament;
- The product label; and
- The packaging.

Contact us before proceeding with installation so that we can review the issue.
Is a tangled refill covered as a defective product?
It depends on the cause.

If the refill appears damaged, incorrectly wound or tangled before the securing straps have been removed, please contact us so that we can assess it.

Tangling caused after opening by incorrect installation, premature removal of the securing straps, failure to secure the reusable spool or other customer handling is not considered a product defect.

Please refer to our Returns & Refunds Policy for full details.

Delivery & 24/7 Locker Collection

Do you offer delivery in Singapore?
Yes. Delivery is available within Singapore.

Available delivery options, charges and any applicable delivery promotions will be shown during checkout.
How does 24/7 locker pickup work?
Place your order normally and select 24/7 Locker Collection where available.

Once your order has been packed and placed in the locker, you will receive a Ready for Collection message together with the collection instructions.

After receiving this message, you may collect your order from our self-service locker 24 hours a day, 7 days a week.
Can I collect immediately after placing my order?
No.

24/7 locker collection means that you can collect at any time after your order has been prepared and placed in the locker.

It does not mean that orders are processed immediately or 24 hours a day.

Please wait for our Ready for Collection message before travelling to the collection point.
Can I place an order late at night and collect it immediately?
Not necessarily.

Orders placed outside our processing times may only be prepared later.

Once your order has been packed and placed into the locker, you will receive a collection notification. You may then collect it at any time.

3DS Wallet & Cashback

What is 3DS Wallet?
3DS Wallet allows you to pre-purchase store credit and receive additional value to use on future purchases from 3D Supply.

Current top-up options:

Pay S$100 → Receive S$105

Pay S$300 → Receive S$324

Please contact us if you require a custom store-credit amount.
Do I earn cashback on my purchases?
Eligible purchases currently receive 2% cashback as 3DS Wallet credit.

The credit can be used towards eligible future purchases from 3D Supply.
Can I withdraw 3DS Wallet credit as cash?
No.

3DS Wallet is store credit intended for purchases from 3D Supply and cannot be withdrawn or exchanged for cash.

Promotional or bonus store credit also has no cash value.
Are 3DS Wallet top-ups refundable?
3DS Wallet top-ups are generally non-refundable once purchased.

Stock & Orders

What happens if a colour is sold out?
Sold-out colours may temporarily become unavailable for selection.

We regularly replenish popular colours, but restock timing depends on supplier availability and incoming shipments.

If you need a specific colour, feel free to contact us to ask about expected availability.
Can I request a colour, filament or product that you do not currently carry?
Yes.

If there is a Bambu Lab colour, filament type or accessory that you would like us to stock, please contact us.

Customer requests help us decide which products to bring in during future restocks.
Do you accept bulk or business orders?
Yes.

For larger quantities, recurring requirements, print farms, businesses, schools or other bulk purchases, please contact us.

Depending on the product and quantity required, we may be able to arrange stock specifically for your order.
Can I change my order after placing it?
Please contact us as soon as possible if you notice an error.

If your order has not yet been prepared or fulfilled, we may try to assist with changes where possible.

Changes are not guaranteed, so please check your colour, material, quantity and spool option carefully before completing your order.

Returns, Refunds & Product Care

Do you accept change-of-mind returns?
No.

We do not accept returns, exchanges or refunds simply because you changed your mind, ordered the wrong colour or material, ordered the wrong quantity or no longer require the product.

Please check your order carefully before completing payment.

This does not affect any applicable rights relating to defective, damaged or incorrectly supplied goods.
What if I receive the wrong, damaged or defective product?
Please contact us as soon as reasonably possible.

Provide your order number together with clear photographs or videos showing the product, packaging and issue.

We will review the case and provide an appropriate remedy where applicable.

Please do not dispose of the product until the issue has been reviewed.
Can opened filament be returned?
Opened or unsealed filament is generally not eligible for return or refund unless there is evidence of a genuine defect that existed when the product was supplied.

Filament can be affected by moisture, storage, installation and customer handling after opening.

Please refer to our Returns & Refunds Policy for full details.
How should I store my filament?
Keep filament dry and sealed whenever it is not in use.

For longer-term storage, we recommend storing filament in an airtight container or sealed bag together with suitable desiccant.

Filament that has absorbed moisture may require drying before printing.
Why has my filament become brittle, stringy or difficult to print?
Filament can absorb moisture from the surrounding air.

Depending on the material and storage conditions, wet filament may result in symptoms such as:

- Excessive stringing;
- Popping or crackling during extrusion;
- Poor surface finish;
- Reduced print quality; or
- Brittle filament.

Proper storage and, where necessary, filament drying can often restore usable filament.

About 3D Supply

What is 3D Supply?
3D Supply is a Singapore-based retailer focused on reliable 3D printing supplies, with an emphasis on genuine Bambu Lab filament and convenient local fulfilment.

Our goal is to make it easier for local makers, hobbyists and businesses to purchase the filament they need without waiting for overseas delivery.
Is 3D Supply affiliated with Bambu Lab?
Unless expressly stated otherwise, 3D Supply is an independent retailer and is not operated by Bambu Lab.

Bambu Lab and its product names, trademarks and logos belong to their respective owners.
How can I contact 3D Supply?
For product questions, stock enquiries, bulk purchases, 3DS Wallet enquiries or assistance with an existing order, please contact us through the contact options available on 3dsupply.sg.