FREE SHIPPING ON ORDERS >$35

Returns & Refunds Policy

# Returns & Refunds Policy

Last updated: 20 September 2026

At 3D Supply, all sales are final except where an item is defective, damaged, incorrectly supplied, or where a remedy is required under applicable Singapore law.

Please read this policy before placing your order.
No Change-of-Mind Returns
We do not accept returns, exchanges or refunds for change of mind.

This includes situations where:

- You ordered the wrong colour;
- You ordered the wrong material;
- You ordered the wrong quantity;
- You no longer need or want the item;
- You purchased a refill without owning a compatible reusable spool;
- You found the same product cheaper elsewhere; or
- You changed your mind after placing or receiving the order.

Please check your order carefully before completing payment.

If you notice an error immediately after placing your order, please contact us as soon as possible. We may try to assist if the order has not yet been prepared, but amendments are not guaranteed.
Wrong, Damaged or Defective Items
Please contact us as soon as reasonably possible if:

- You received the wrong product or colour;
- An item arrived damaged;
- An item appears defective; or
- Part of your order is missing.

Please provide your order number together with clear photographs or videos showing the product, packaging and issue where applicable.

After reviewing the issue, we may provide an appropriate remedy such as a replacement, exchange, repair, price adjustment or refund, depending on the circumstances.

Where the issue is caused by an error on our part, we will bear reasonable costs associated with an approved return or replacement.
Filament Refill Installation & Tangling
Filament refills must be installed correctly onto a compatible reusable spool and handled carefully.

Do not remove the securing straps until the refill has been correctly positioned and the reusable spool has been fully assembled and locked.

During installation:

- Ensure the refill is properly seated and aligned;
- Ensure both halves of the reusable spool are fully locked;
- Keep the filament end under control;
- Do not allow the refill to loosen or expand;
- Do not allow the filament end to cross underneath another winding; and
- Do not remove the securing straps prematurely.

Once the securing straps have been removed, improper installation or handling may cause the filament to loosen, unravel, overlap, cross underneath adjacent windings or become tangled.

Tangling, unravelling or feeding problems caused by incorrect installation or customer handling are not considered product defects and are not eligible for a return, replacement or refund.

This includes, but is not limited to:

- Removing the securing straps before the refill is correctly installed;
- Failing to fully lock the reusable spool;
- Allowing the refill to loosen or unwind during installation;
- Losing control of the filament end;
- Allowing filament to cross beneath another winding;
- Incorrectly removing a partially used refill from a spool;
- Incorrectly reinstalling a partially used refill; or
- Any other handling that causes the filament to become tangled, loose or damaged.

If the refill appears damaged, crushed, incorrectly wound or tangled before the securing straps have been removed, please stop installation and contact us immediately.

Please take clear photographs showing:

- The refill;
- The securing straps still attached;
- The filament condition;
- The product label; and
- The packaging.

We will review the issue individually.
Opened or Used Filament
Opened filament is generally not eligible for return or refund unless there is evidence of a genuine defect that existed when the product was supplied.

Filament is sensitive to moisture, storage conditions, installation and handling.

Issues caused after opening by:

- Moisture absorption;
- Improper storage;
- Contamination;
- Incorrect printer settings;
- Incorrect spool installation;
- Tangling caused by handling;
- Excessive heat; or
- Customer misuse

are not considered product defects.
Filament Refills & Reusable Spools
Unless specifically stated otherwise, a filament refill does not include a reusable spool.

Customers are responsible for ensuring that they have a compatible reusable spool before ordering a refill.

Purchasing a refill without owning a compatible spool does not make the product defective and is not grounds for a refund or return.

Reusable spools may also be purchased separately where available.
Colour Appearance
We aim to represent product colours as accurately as reasonably possible.

However, colours may appear slightly different due to:

- Screen settings;
- Lighting;
- Photography;
- Display calibration; and
- Minor manufacturing batch variations.

Minor differences between the colour displayed online and the physical product are not considered defects.
24/7 Locker Collection
Please check your order after collection.

Our 24/7 locker is intended for collection only.

Do not leave returns, exchanges or unwanted products inside the locker unless we have specifically instructed you to do so.

If there is an issue with your order, contact us first so that we can arrange the appropriate next steps.
Refunds
Where a refund has been approved, it will generally be returned using the original payment method where reasonably possible.

Processing times may vary depending on the payment provider or financial institution.

Delivery charges are generally non-refundable unless the issue arose because of an error by 3D Supply or where otherwise required by applicable law.
3DS Wallet & Store Credit
Purchases made using 3DS Wallet or store credit will generally be refunded back to the customer's 3DS Wallet balance where appropriate.

Promotional or bonus store credit:

- Has no cash value;
- Cannot be withdrawn; and
- Cannot ordinarily be exchanged for cash.

Store credit top-ups are non-refundable once purchased.
Products Not Eligible for Return or Refund
The following are generally not eligible for return or refund unless there is a genuine defect or another applicable legal entitlement:

- Change-of-mind purchases;
- Incorrect colour, material or quantity selected by the customer;
- Opened or unsealed filament;
- Filament mounted onto a spool;
- Filament whose securing straps have been removed;
- Filament that has been partially used;
- Filament tangled or unravelled through customer handling;
- Products damaged through improper installation;
- Products damaged through improper storage;
- Products damaged through misuse;
- Products no longer in their original condition;
- Clearance or final-sale products where stated; and
- Custom or specially ordered products.
Assessment of Defects
Where it is unclear whether an issue is caused by a manufacturing defect or customer handling, we may request reasonable evidence before determining the appropriate remedy.

This may include:

- Photographs;
- Videos;
- Original packaging;
- Product labels;
- Batch information;
- Photographs of the securing straps;
- Details of how the refill was installed;
- Details of how the filament was stored; and
- Return of the product for inspection.

Please do not dispose of the affected product until the matter has been reviewed.
How to Report an Issue
Please contact 3D Supply through the contact options available on 3dsupply.sg.

Please provide:

- Your order number;
- The product concerned;
- A description of the issue;
- Photographs or videos where relevant; and
- Any other information reasonably required to assess the issue.

Please wait for our confirmation before returning any product.
3D Supply
Singapore
3dsupply.sg